Information about companies exporting in Republic of Belarus: message board, products and services.
Main menue
Advertisements
          

REDOXMETRICAL INDASTRIAL AND LABORATORY ELECTRODE ЭO-01
Added: 15-04-2016
Print version:
Send quote

REDOXMETRICAL INDASTRIAL AND LABORATORY ELECTRODE ЭO-01 Electrode ЭО-01 is designed to measure the oxidizing potentials of liquid media. Electrode is manufactured using a special electrode glass, possessing electronic conductivity. Electrode allows making measurements in solutions with low-grade oxidation-reduction properties (in solution with relatively low buffer capacity). In contrast to electrodes made of noble metals ЭО-01 is not intoxicated by catalytic poisons (Н2S, As, CN– etc.), does not catalyze the coupling of oxygen О2 and Н2 with tested redox systems, and whereupon the measurements of oxidizing potential in aerated sys-tems are possible. Application Electrode ЭО-01 can be used as an indicator of oxidizing poten-tial instead of platinum electrodes in the range of pH values from 3 to 11 pH during direct potentiometric measurements from 0 to 11 рН during the potentiometric titration. Electrode is designed for connection to СХ-2, devices type ДПг-4М, ДМ-5М and formerly produced by plant devices such as рН-340, рН-121, рН-262, ЭВ-74, И-130. To connect electrode ЭО-01 to devices such as И-160 and orthers the adapter 5М6.607.010 with plug connector 5М5.282.004 (produced by plant) can be used. Electrode ЭО-01 is registered in the State Register of Measuring Instruments and approved for use: in the Republic of Belarus, the Russian Federation. Rules of order When ordering the electrode ЭО-01 it is necessary to specify additionally the length of lead-out wire in centimetres. If the length of lead-out wire is not specified, electrode will be delivered with wire length 100 cm. Gomel Plant of Measuring Equipment specializes in the production of potentiometer, potentiostat, polarographic,amperometric, analytical instruments and electrode systems to them and measuring technology for the measurement ofacid-base indicators of liquid media (hydrogen ion activity) and the activity of other ions, analysis of steels and alloys, carbonand sulfur, quantitative analysis of a wide range of substances.

Company: Gomel Plant of Measuring Equipment JSC Country/Region/City: Belarus / Belarus / Minsk Address: Gomel,. International, 49 ZIP/Postal code: 246001 Phone: +375232754846 Fax: +375232757269 Contact person: Natalia Sodoleva Web-site: www.zipgomel.by



Gomel Plant of Measuring Equipment is one of the leading companies in the instrument-making industry of the Republic of Belarus, which specializes in analytical instruments designed for monitoring and control processes and environmental monitoring, as well as the electrode systems for the potentiometric measurements. Having our own production based on modern technologies, and testing equipment enables to produce high quality product and provide a high level of warranty and after warranty service.
 

Serial production of measuring devices at the plant began in 1958. Since then, we constantly monitor the trends in modern instrumentation, using advanced design and technology to increase functionality and expand the product portfolio. Much attention is paid to the enterprise quality management.
 

Also "Gomel Plant of Measuring Equipment" provides the following services:

  • Tenderloin, engraved details (not thicker than 2 mm) on a laser complex;
  • Assembly and adjustment of instruments;
  • Production of single-, double-sided printed circuit boards and combined negative chemical methods (dimensions up to 250h200 mm);
  • Assembly of printed circuit boards;
  • Testing in climatic chambers of the effect of humidity, temperature;
  • Measurement of noise, light, checking for electrical safety;
  • Design and manufacture of nonstandard equipment, dies, molds or drawings on the instructions of the customer;
  • Carrying out works on the snap of the customer:
    - Stamping work (press the mechanical efforts of 10-ton, 25-ton, 40-ton, 63-ton, 100-ton);
    - Casting and processing of plastics (thermosets, thermoplastics) and rubber (63-ton hydraulic press, 100-ton);
    - Pressure die casting of aluminum alloys (for injection molding machines, mod. 71A108, 71A109).
     
  • Spark Machining CNC (size workpieces to 200h300h50 mm);
  • Manufacture of cartons of boxed and corrugated board, including at the roller press;
  • Spot welding carbon steels, welding aluminum parts and parts from stainless steel alloys;
  • Galvanic platings (zinc, nickel, chromium, oxidation, copper plating, electropolishing), at both the suspensions, and in drums;
  • Coloring polymeric dyes (dimensions up to 600x800 mm);
  • Woodworking. Manufacturing of doors, door systems, skirting, etc.


We invite you to become our customers and partners. We always look at business proposals and wishes.
 

Always ready for fruitful and mutually beneficial cooperation.

246001, Republic of Belarus, Gomel,. International, 49 
e-mail: 
zip-gomel@yandex.ru 

 

Company info
Company: Gomel Plant of Measuring Equipment JSC
City: Minsk Belarus
Address: Gomel,. International, 49
Phone: +375232 58 42 72
Fax: +375232 33-31-04
Web site: www.raton.by


   
"Business-Inform" Ltd. All rights reserved. Using these sources you agree to our Terms and Conditions