Information about companies exporting in Republic of Belarus: message board, products and services.
Main menue
Advertisements
          
Home » Company Directory » Gomel Plant of Measuring Equipment JSC
Gomel Plant of Measuring Equipment JSC


INDICATOR OF SHORT CIRCUIT ИКЗ-02
INDICATOR OF SHORT CIRCUIT ИКЗ-02
INDICATOR OF SHORT CIRCUIT ИКЗ-02 Indicator of short circuit ИКЗ-02 is applied to fixate current flow of short circuit of one or several damaged segments of cable line to 10 kV. Advantages of device - Easy to use. - Allows prompt determination of damaged segments fault in cable line. On separate order is supplied - plates for MTД attachment to the cell with overall dimensions 1000х60х10 mm - 3 pc. Standard delivery set Indicator unit 1 pc. Magnetic current sensor 3 pc. Set of spare parts and accessories 1 kit Operations manual 1 copy Specifications - Indicator is intended to operate at temperature from - 25 °С to + 40°С, at relative humidity of air not exceeding 98% at 20°С and height above water not more than 1000 m. - Indicator power supply is affected from AC network with voltage (220 +22 -33) V and frequency (50±0,5)Hz. - Main power not exceeding 6V*A. - Adjustment range of actuating current 100-2000 А. - Actuation time of indicator from the moment of flow of short circuit current not more than 0,06s. - Release time of indicator to initial state (at supply voltage) not more than 30 s. - Quantity of fixation directions of short-circuit current - 3. - LED response indication and discrete information generation to telecontrol device are provided. - Outputs to connect telecontrol devices provides commutation of constant voltage of positive polarity: voltage, not more than - 42VВ; current, not more than - 0,1 А; resistance of switch contact in open condition, not more than - 200 kOhm; resistance of switch contact in close condition, not more than - 200 Ohm; - Time of information storage by indicator about current flow of short circuit on segment of cable line (after switching-off during response time) not more than 8 hours. - Overall dimensions, mm, not more than: - indicating block - 250x200x80 - MDT - 200x100x100 - Weight, kg, up to: - indicating block - 3 - MDT - 0,8 Gomel Plant of Measuring Equipment specializes in the production of potentiometer, potentiostat, polarographic,amperometric, analytical instruments and electrode systems to them and measuring technology for the measurement ofacid-base indicators of liquid media (hydrogen ion activity) and the activity of other ions, analysis of steels and alloys, carbonand sulfur, quantitative analysis of a wide range of substances.

Company: Gomel Plant of Measuring Equipment JSC Country/Region/City: Belarus / Belarus / Minsk Address: Gomel,. International, 49 ZIP/Postal code: 246001 Phone: +375232754846 Fax: +375232757269 Contact person: Natalia Sodoleva Web-site: www.zipgomel.by



Gomel Plant of Measuring Equipment is one of the leading companies in the instrument-making industry of the Republic of Belarus, which specializes in analytical instruments designed for monitoring and control processes and environmental monitoring, as well as the electrode systems for the potentiometric measurements. Having our own production based on modern technologies, and testing equipment enables to produce high quality product and provide a high level of warranty and after warranty service.
 

Serial production of measuring devices at the plant began in 1958. Since then, we constantly monitor the trends in modern instrumentation, using advanced design and technology to increase functionality and expand the product portfolio. Much attention is paid to the enterprise quality management.
 

Also "Gomel Plant of Measuring Equipment" provides the following services:

  • Tenderloin, engraved details (not thicker than 2 mm) on a laser complex;
  • Assembly and adjustment of instruments;
  • Production of single-, double-sided printed circuit boards and combined negative chemical methods (dimensions up to 250h200 mm);
  • Assembly of printed circuit boards;
  • Testing in climatic chambers of the effect of humidity, temperature;
  • Measurement of noise, light, checking for electrical safety;
  • Design and manufacture of nonstandard equipment, dies, molds or drawings on the instructions of the customer;
  • Carrying out works on the snap of the customer:
    - Stamping work (press the mechanical efforts of 10-ton, 25-ton, 40-ton, 63-ton, 100-ton);
    - Casting and processing of plastics (thermosets, thermoplastics) and rubber (63-ton hydraulic press, 100-ton);
    - Pressure die casting of aluminum alloys (for injection molding machines, mod. 71A108, 71A109).
     
  • Spark Machining CNC (size workpieces to 200h300h50 mm);
  • Manufacture of cartons of boxed and corrugated board, including at the roller press;
  • Spot welding carbon steels, welding aluminum parts and parts from stainless steel alloys;
  • Galvanic platings (zinc, nickel, chromium, oxidation, copper plating, electropolishing), at both the suspensions, and in drums;
  • Coloring polymeric dyes (dimensions up to 600x800 mm);
  • Woodworking. Manufacturing of doors, door systems, skirting, etc.


We invite you to become our customers and partners. We always look at business proposals and wishes.
 

Always ready for fruitful and mutually beneficial cooperation.

246001, Republic of Belarus, Gomel,. International, 49 
e-mail: 
zip-gomel@yandex.ru 

 



Print version
   
"Business-Inform" Ltd. All rights reserved. Using these sources you agree to our Terms and Conditions